Table of Contents
Advertisement
Wireless-G CompactFlash Card
Appendix A: Troubleshooting
This appendix consists of two parts: "Common Problems and Solutions" and "Frequently Asked Questions." This
appendix provides solutions to problems that may occur during the installation and operation of this product.
Read the description below to solve your problems. If you can't find an answer here, check the Linksys website at
www.linksys.com.
Common Problems and Solutions
1. My PDA does not recognize the Wireless CompactFlash Card.
• Make sure that the Wireless CompactFlash Card is properly inserted into the CompactFlash port.
• Make sure the Link LED is solidly lit.
2. The Wireless CompactFlash Card does not work properly.
• Reinsert the Wireless CompactFlash Card into the PDA's CompactFlash port.
• Uninstall the utility and driver software from your PC and PDA device.
• Restart your PC, and repeat the software and hardware installation as specified in this User Guide.
3. 3. I cannot communicate with the Access Point in the Infrastructure network.
• Make sure that the Access Point is powered on.
• Make sure that your Wireless CompactFlash Card is configured with the same channel, SSID, and WEP
settings as the Access Point.
Frequently Asked Questions
What is the 802.11b standard?
One standard for wireless networking, it allows wireless networking hardware from different manufacturers to
communicate, provided that the hardware complies with the 802.11b standard. The 802.11b standard states a
maximum data transfer rate of 11Mbps and an operating frequency of 2.4GHz.
What is the 802.11g standard?
One standard for wireless networking, it allows wireless networking hardware from different manufacturers to
communicate, provided that the hardware complies with the 802.11g standard. The 802.11g standard states a
maximum data transfer rate of 54Mbps and an operating frequency of 2.4GHz.
Appendix A: Troubleshooting
Common Problems and Solutions
25
Advertisement
Table of Contents
Troubleshooting
