Linksys WCF54G Quick Installation

®
A Division of Cisco Systems, Inc.
Package Contents
• Wireless-G CompactFlash Card
• Setup Wizard CD-ROM with Drivers and User
Guide
• Quick Installation guide
• Registration Card
2.4
GHz
Wireless-G
802.11g
CompactFlash Card
Wireless Quick Installation
Model No.
Model No. WCF54G
1
Setting up the PDA
IMPORTANT: Do not insert the Card into the PDA
until instructed to do so or the setup will not work.
A
Connect your PDA to your PC.
Make sure you have the
Microsoft ActiveSync software
installed on your PC. Refer to
your PDA's documentation for
information on Microsoft
ActiveSync software.
A
B
Insert the Setup CD-ROM into
your PC's CD-ROM drive and
the screen in Figure B should
appear automatically.
If this screen does not appear
automatically, you can access
it by clicking the Start button
and choosing Run. In the drop-
down box, type d:\setup.exe (if
"d" is the letter of your CD-ROM
drive) and click OK.
B
C
Click the Install button to start
the Setup Wizard.
D
The following screen displays
the License Agreement. Read
the agreement, then if you
agree, click Next to continue..
D
2
E
When asked if you want to
install the Linksys Wireless-G
CompactFlash Card using the
default application install
directory, (Fig. E) click Yes to
continue.
E
F
When asked to check your
mobile device screen to see if
additional steps are necessary
to complete this installation,
click OK.
F
G
The Congratulations screen will
appear when the installation is
complete. Click Exit to exit the
Setup Wizard.
G
2
Installing the CompactFlash Card
A
The Installation has com-
pleted successfully screen will
appear on your PDA. Click OK,
B
Disconnect the PDA from your
PC.
A
C
Insert the Wireless-G Compact-
Flash Card into your PDA in the
direction shown in Figure C.
C
D
Pocket PC 2002 users will see
the screen in Figure D. Click
OK.
D
E
The Wireless Network Monitor
icon will appear on the desk-
top of your PDA.
E