Kenwood DNX719VHD Quick Start Manual page 9

Number Name
Remote
9
Sensor
AUDIO
10
USB
11
DISC
12
TUNER
13
Release key
14
Disc insert
15
slot
SI indicator
16
* The display may not switch to the Tone Control screen in some conditions.
How to insert a MicroSD card
1) Open the microSD card slot cover as the
8
illustration in the right.
2) Hold the microSD card with the pins facing
left and the notched section down, and
insert it into the slot until it clicks.
● To eject the card:
Push the card until it clicks and then remove your
finger from the card.
The card pops up so that you can pull it out with
your fingers.
Receives the remote control signal.
Displays the Tone Control screen (Instruction Manual P.89).*
Switches to the USB or iPod sources. (Instruction Manual P.77)
Switches to the disc media sources.
Switches to the Tuner sources.
Detaches the part of front panel.
A slot to insert a disc media.
If the SI function is turned on, this indicator flashes when the panel is
detached (Instruction Manual P.78).
9
Motion
Pins side
DNX719VHD