Basic Operations; Functions Of The Buttons On The Front Panel - Kenwood DNX719VHD Quick Start Manual

Gps navigation system
Hide thumbs Also See for DNX719VHD:
Table of Contents

Advertisement

Return to the Top page

Basic Operations

B
asic Operations
F
unctions of the Buttons on the Front Panel
1
2
3
4
5
6
7
NOTE
• The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason,
they may be different from the actual panels.
Number
Name
0 (Eject)
• Ejects the disc.
1
• Pressing for 1 second ejects the disc forcibly.
MENU
• Displays the Top Menu screen
2
• Pressing for 1 second turns the power off.
• When the power off, turns the power on.
NAV
• Displays the navigation screen.
3
• Pressing for 1 second switches AV out sources.
TEL
• Displays the Hands Free screen (P.62).
4
• Pressing for 1 second stores the tag data of the current music from HD
Radio broadcast or SiriusXM (P.55).
SCRN
• Displays the Screen Control screen.
5
• Pressing for 1 second displays rear view camera display.
Volume Knob • Turning adjusts volume up or down.
6
• Pressing switches attenuation of the volume on/off.
Reset
If the unit or the connected unit fails to operate properly, the unit returns
7
to factory settings when this button is pressed (P.99).
6 6
16
15
14
13
12
11
10
9
8
Motion
(P.12)
Number
Name
microSD card
A slot to insert a microSD card. The card is used for upgrading the map. For
8
slot
how to upgrade the map, refer to the instruction manual of the navigation
system.
Remote
Receives the remote control signal.
9
Sensor
AUDIO
Displays the Tone Control screen (P.89).*
10
Switches to the USB or iPod sources (P.77).
USB
11
DISC
Switches to the disc media sources.
12
TUNER
Switches to the Tuner sources.
13
Release key
Detaches the part of front panel.
14
Disc insert
A slot to insert a disc media.
15
slot
SI indicator
If the Security Indicator (SI) function is turned on, this indicator flashes
16
when the panel is detached (P.78).
* The display may not switch to the Tone Control screen in some conditions.
How to insert a microSD card
1) Open the
8
microSD card slot cover as the
illustration in the right.
2) Hold the microSD card with the pins facing
left and the notched section down, and
insert it into the slot until it clicks.
● To eject the card:
Push the card until it clicks and then remove your
finger from the card.
The card pops up so that you can pull it out with
your fingers.
Return to the Top page
Basic Operations
Motion
Pins side
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents