D-Link DWR-932 User Manual page 22

Section 3 - Configuration
Mobile Network Settings allows you to configure the settings needed to connect
to your mobile service provider. If you do not know this information, please
contact your service provider.
Auto Connect: Check this option if you want the DWR-932 to automatically
connect to a mobile network after it has been powered on, or
has been disconnected from its current mobile network.
Roaming: Select whether you would like to Enable or Disable mobile
network roaming from the drop-down menu.
Caution: Roaming on networks other than your own may
incur additional usage charges.
Network Mode: Select your preferred cellular network connection mode
APN
Selection: If you are already connected to a mobile network, your ISP
may provide the necessary APN which you can select from
the drop down list.
Manual: Enter the Access Point Name (APN) for the connection. If you
do not know this information, please contact your service
provider.
Username: Enter the username to be used for this connection.
Password: Enter the password to be used for this connection.
Method: Choose the authentication method that you ISP uses to
connect to its mobile network. If you do not know this
information, please contact your service provider.
D-Link DWR-932 User Manual 18