Table of Contents
Advertisement
Novell NetWare 3.x Client Setup for Windows 95, 98, or
Millennium
The instructions below explain how to set up the regular Novell NetWare 3.x
client for use on a Windows 95, 98, or Millennium PC. If you are installing
NetWare's Client32 software instead, follow the instructions on page 38.
1. Follow the Windows 95 setup instructions or the Windows 98 setup instruc-
tions.
2. Start up Windows. Click on Start, Settings, then Control Panel. Double-
click on Network. The Network window appears. Click on the
Configuration tab.
3. In the Primary Logon Box, choose Client for NetWare Networks.
4. Under the The following network components are installed box, highlight
Client for NetWare Networks and click on the Properties button.
5. The Client for NetWare Networks Properties window appears. Under the
General tab, enter the name of your network's Preferred Server. Assign the
First Network Drive Letter; the default is F. Make sure the Enable logon
script processing is checked.
6. Click OK. Click on the Access Control tab. Make sure the Share-level
access control option is selected; do not select User-level access control.
7. When you're done, click OK to restart your computer.
The NetWare portion of your Windows setup is complete.
51
Instant Gigabit Series
EtherFast
10/100/1000 8+1 Workgroup GigaSwitch Starter Kit
®
Starting Over in Windows 95, 98, or Millennium
If you experience installation difficulties, you may need to re-install all of the
Windows networking components from scratch. The instructions below explain
how to give your PC a clean sweep so that you can retry the Instant Gigabit
Network Adapter software installation.
1. At the desktop click on the Start Button, highlight Settings, click on
Control Panel.
2. Double-click on the Network Icon.
N N o o t t e e : : The screen shot above, and the ones
on the next three pages, are examples only.
They may differ from system to system.
52
Advertisement
Table of Contents
