Control Panel And Features - Whirlpool cabrio WTW8000DW Use & Care Gude

Control Panel and Features

Not all features and cycles are available on all models.
STEAM MODEL
1
NON-STEAM MODEL
1
NOTE: The control panel features a sensitive surface that responds to a light touch of your finger. To ensure your selections are
registered, touch the control panel with your finger tip, not your fingernail. When selecting a setting or option, simply touch its name
until the desired section is illuminated.
POWER BUTTON
1
Touch to turn the washer On. Touching once while the
washer is on will cancel the current cycle, touching twice
will turn the washer Off.
WHAT TO WASH/HOW TO WASH
2
First select a cycle from the "What to Wash" and then
select the "How to Wash" to get the best combination
cycle available for the type of items you are going to
wash. See "Cycle Guide" for cycle details.
3
START/PAUSE BUTTON
Touch and hold START/PAUSE to begin the selected cycle;
touch again to pause a cycle.
5
5
2
4 6
2
4 6
LED TIME/STATUS DISPLAY
4
The Estimated Time Remaining display shows the time
required for the cycle to complete. Factors such as load
size and water pressure may affect the time shown in
the display. Tightly packed loads, unbalanced loads, or
excessive suds may cause the washer to adjust the cycle
time, as well.
If you have set a delay start to the cycle, the Estimated
Time Remaining display will show the delay time adjusted.
When the cycle is complete, the Done indicator will light
until the lid is opened.
ADD GARMENT
When Add Garment is lit, you may pause the washer,
open the lid, and add items. Touch and hold START to
start the washer again.
3
5
7
3
5
7
5