Samsung Galaxy Note 3 Disassembly Manual page 5

Samsung Galaxy Note 3 (SM-N900T) – Disassemble Guide
Audio Jack & Earpiece Speaker Assembly
Dock Connector Assembly
Display Assembly (LCD & Touch Screen Digitizer)
http://www.fixez.com/
Locate and remove the one small Phillips screw (#00)
10.
that secures the audio jack and earpiece speaker
assembly (marked with orange circle).
Now use the fine tip curved tweezers to gently
maneuver the assembly up and out of the Note 3.
The dock connector assembly is held in place by
11.
adhesive, with your nylon spudger gently pry it up and
remove it from the Galaxy Note 3 (the use of a heat
gun is optional to soften the adhesive).
At this time, the display assembly (LCD & touch screen) is
12.
fused together and cannot be separated. It is secured to
the front housing/frame of the smartphone with a lot of
adhesive that will require heat and patience in order to
separate.
This procedure is recommended only on a Note 3 with a
display assembly that is already cracked or damaged.
Using the heat gun, begin warming up the adhesive that
secures the LCD & touch screen digitizer assembly to the
smartphones front housing/frame.
Page 5 of 7