Supported Modes; The Wt-3 Setup Utility Cd - Nikon WT-3 User Manual

Supported Modes

The WT-3 connects the camera to wireless and Ethernet networks. The camera can
then be controlled remotely from a computer or photographs transmitted from the
camera to an ftp server or printer. The WT-3 supports the following modes:
Mode Host
Transfer Computer or
mode ftp server
PC mode Computer
Computer
Print
mode PD-10 wireless
printer adapter

The WT-3 Setup Utility CD

The supplied WT-3 Setup Utility CD contains the following:
• WT-3 Setup Utility (
• D200 A and B fi rmware version 2.00 (
ware before using the WT-3.
• D200 fi rmware update manual (
the camera fi rmware.
Wireless Networks: Infrastructure Versus Ad-hoc
Wireless networks may be either infrastructure or ad-hoc.
• Infrastructure: Connection is via a wire-
less LAN access point.
Wireless LAN
WT-3
access point
2
Upload new or existing photographs to
host.
Control camera from computer.
Print JPEG photographs on printer con-
nected to network computer.
Print JPEG photographs on PictBridge
printer connected to optional PD-10
wireless printer adapter.
10, 15): Use this software to copy host profi les to the camera.
9): Update to this version of the camera fi rm-
9): Read this manual for instructions on updating
Host
Description
• Ad-hoc: A peer-to-peer wireless network
consisting solely of the WT-3 and the
host.
WT-3
Network type
30
Wireless and
37
Ethernet
42
Wireless
45
only
Host