Supported Modes; The Wt-3 Setup Utility Cd - Nikon WT-3 User Manual

Supported Modes

The WT-3 connects the camera to wireless and Ethernet networks. The camera can
then be controlled remotely from a computer or photographs transmitted from the
camera to an ftp server or printer. The WT-3 supports the following modes:
Mode Host
Transfer Computer or
mode ftp server
PC mode Computer
Computer
Print
mode PD-10 wireless
printer adapter

The WT-3 Setup Utility CD

The supplied WT-3 Setup Utility CD contains the following:
• WT-3 Setup Utility (
• D200 A and B fi rmware version 2.00 (
ware before using the WT-3.
• D200 fi rmware update manual (
the camera fi rmware.
Wireless Networks: Infrastructure Versus Ad-hoc
Wireless networks may be either infrastructure or ad-hoc.
• Infrastructure: Connection is via a wireless
LAN access point.
Wireless LAN
WT-3
access point
2
Upload new or existing photographs to host.
Control camera from computer.
Print JPEG photographs on printer connected to
network computer.
Print JPEG photographs on PictBridge printer con-
nected to optional PD-10 wireless printer adapter.
7, 11): Use this software to copy host profi les to the camera.
6): Update to this version of the camera fi rm-
6): Read this manual for instructions on updating
Host
Description
• Ad-hoc: A peer-to-peer wireless network con-
sisting solely of the WT-3 and the host.
WT-3
Network type
21
Wireless and
26
Ethernet
30
Wireless
32
only
Host