Lower Door Seals; Heat Pump Disassembly - Bosch SHE4AM12U Repair Instructions

5.11

Lower door seals

Tools needed: T20 Torx & #2 Phillips screwdrivers and pliers.
1. Remove inner door – section 5.9. The lower door seal
will be loose since it's two (2) screws were removed when
the inner door was removed (below left). If the seal sticks
to the inner door, separate the seal from the door by hand
(below left).
2. Remove lower door seal.
702_58300000130262_ara_en_c
The lower door seal is
attached by two of the four
inner door screws. It is
removed along with the
inner door.
5.12

Heat pump disassembly

The heat pump is best accessed from the bottom of the
dishwasher by flipping it upside-down or on it's back.
same process to access the float and aqua sensor.
1 2 3 4 5
Tools needed: T20 Torx, #2 Phillips & small flat blade
screwdrivers and pliers.
1. Remove toe kick – section 5.1.4.1.
2. Flip dishwasher for access – section 5.1.6.1.
1. Float assy.
2. Adapter
3. Clamp
4. Sump
5. Seal ring
6. Heat pump
6
Page 33 of 50
Use the