Table of Contents
Advertisement
CPU Clock (MHz)
This option is av ailable only w hen Linear Frequency Control is enabled.
100~355
Selec t CPU Clock to 100MHz~355MHz.
If y ou use a Pentium 4 processor w ith 800MHz FSB, please set "CPU Clock" to 200MHz.
Incorrect using it may cause y our sy stem corrupted. For pow er users only !
DRAM Clock (MHz)
This option is av ailable only w hen Linear Frequency Control is enabled.
Pleas e set DR AM Clock according to y our requirement.
If y ou use DDR266 DRAM m odule, please set "DRAM Cloc k(MHz)" to 266. If y ou use DDR333
DRAM module, please set "DRAM Cloc k(MHz)" to 333. If y ou use DDR400 DRAM m odule,
pleas e set "DR AM Clock (MHz)" to 400.
Incorrect using it may cause y our sy stem corrupted. For pow er users only !
AGP/PCI Clock Control
AUTO
Set AGP/PCI clock automatically. (Default Value)
Manual
Set AGP/PCI clock manually .
Incorrect using it may cause y our sy stem corrupted. For pow er users only !
AGP Clock (MHz)
This option is av ailable only w hen AGP/PC I Clock Co ntrol is s et to Manual.
Pleas e set AGP Clock according to y our requirement.
Incorrect using it may cause y our sy stem corrupted. For pow er users only !
PCI Clock (MHz)
When y ou selec t to set the AGP Clock (MHz) manually , the PCI Clock (MHz) w ill c hange
autom atically depending on the AGP Clock (MHz) y ou set.
DRAM Voltage Control
Please note that by ov ercloc king y our sy stem through the increase of the DRAM v oltage, damage
to the memory may oc cur.
Normal
Set DRAM Voltage Control to Normal. (Default v alue)
+0.1V
Set DRAM Voltage Control to +0.1V.
Incorrect using it may c ause y our sy stem broken. For pow er End-User use only !
CPU Voltage Control
Normal
Set C PU Voltage Control to Normal. (Default v alue)
+5%
Set CPU Voltage Control to +5%.
+7.5%
Set C PU Voltage Control to +7.5%.
+10%
Set CPU Voltage Control to +10%.
Incorrect using it may c ause y our sy stem broken. For pow er End-User use only !
- 41 -
BIOS Setup
Advertisement
Table of Contents
