Table of Contents
Advertisement
USB Controller
Enabled
Enable USB Controller. (Default v alue)
Disabled
Disable USB Controller.
USB Legacy Support
Enabled
Enable USB Legacy Support.
Disabled
Disable USB Legacy Support. (Default v alue)
SiS Serial ATA Controller
Enabled
Enable SiS Serial ATA Controller. (Default v alue)
Disabled
Disable SiS Serial ATA Controller.
SiS S erial ATA Mode
IDE
Set SiS Serial ATA Mode to IDE.
RAID
Set SiS Serial ATA Mode to RAID (Default v alue).
Onboard Serial P ort 1
Auto
BIOS w ill automatically setup the Serial port 1 address.
3F8/ IRQ4
Enable onboard Serial port 1 and address is 3F8/IRQ4. (Default v alue)
2F8/ IRQ3
Enable onboard Serial port 1 and address is 2F8/ IRQ3.
3E8/ IRQ4
Enable onboard Serial port 1 and address is 3E8/ IRQ4.
2E8/ IRQ3
Enable onboard Serial port 1 and address is 2E8/ IRQ3.
Disabled
Disable onboard Serial port 1.
Onboard Serial P ort 2
Auto
BIOS w ill autom atically set up the Serial port 2 address.
3F8/ IRQ4
Enable onboard Serial port 2 and address is 3F8/ IRQ4.
2F8/ IRQ3
Enable onboard Serial port 2 and address is 2F8/IRQ3. (Default v alue)
3E8/ IRQ4
Enable onboard Serial port 2 and address is 3E8/ IRQ4.
2E8/ IRQ3
Enable onboard Serial port 2 and address is 2E8/ IRQ3.
Disabled
Disable onboard Serial port 2.
Onboard Parallel Port
Disabled
Disable onboard LPT port.
378/ IRQ7
Enable onboard LPT port and address is 378/IRQ7. (Default v alue)
278/ IRQ5
Enable onboard LPT port and address is 278/ IRQ5.
3BC/ IRQ7
Enable onboard LPT port and address is 3BC/ IRQ7.
Paral lel Port Mode
SPP
Use Parallel port as Standard Parallel Port.
EPP
Use Parallel port as Enhanced Parallel Port.
ECP
Use Parallel port as Ex tended Capabilities Port. (Default v alue)
ECP+EPP
Use Parallel port as ECP & EPP mode.
ECP Mode Use DMA
This option is av ailable only w hen Paral lel Port Mode is s et to EC P or ECP+EPP.
3
Set ECP Mode Use DMA to 3. (Default v alue)
1
Set ECP Mode Use DMA to 1.
- 35 -
BIOS Setup
Advertisement
Table of Contents
