Call Using The Plus (+) Code; Call Using A Speed Dial Number; Call A Phone Number With Pauses - Kyocera Kona User Manual

3. Press to dial the entry's default phone number.
– or –
To dial another number from the same entry, press
number, and then press

Call Using the Plus (+) Code

When placing international calls, use Plus Code Dialing to automatically enter the international
access code for your location (for example, 011 for international calls made from the U.S.).
1. Press and hold
2. Enter the country code and phone number, and then press
automatically prepends the access code for international dialing, followed by the country
code and phone number.)

Call Using a Speed Dial Number

Speed dial numbers let you dial numbers by touching and holding a single number on the
keypad. See Set Up Speed Dialing
To use speed dial for locations 2-9:
► From standby mode, press and hold the appropriate key for approximately two seconds.
To use speed dial for locations 10-99:
► From standby mode, enter a two-digit speed dial number, and then press
The display confirms that the number has been dialed when it shows "Connecting..."

Call a Phone Number With Pauses

You can dial or save phone numbers with pauses for use with automated systems, such as
voicemail or credit card billing numbers.
There are two types of pauses available on your phone:
●
Hard Pause sends the next set of numbers when you press SEND TONES (left softkey).
●
2-Sec. Pause automatically sends the next set of numbers after two seconds.
Note: You can have multiple pauses in a phone number and combine two-second and hard
pauses.
Phone Calls
.
to display "+" on your phone screen.
for information on assigning speed dial numbers.
to select the entry, highlight a
. (The phone
.
14