Asus B85M-G Manual page 67

USB Support [Partial Initialization]
[Disabled]
[Full Initialization]
[Partial Initialization]
PS/2 Keyboard and Mouse Support [Auto]
Select any of these settings when PS/2 keyboard and mouse are installed. These settings
only apply when Fast Boot is enabled.
[Auto]
[Full Initialization] For full system control, PS/2 devices will be available during POST at any
[Disabled]
Network Stack Driver Support [Disabled]
[Disabled]
[Enabled]
Next Boot after AC Power Loss [Normal Boot]
[Normal Boot]
[Fast Boot]
2.8.2
[Auto]
[Full Screen]
[Disabled]
POST Delay Time [3 sec]
This item appears only when you set Boot Logo Display to [Enabled]. This item allows
you to select the desired additional POST waiting time to easily enter the BIOS setup. You
can only execute the POST delay time during Normal Boot. The values range from 0 to 10
seconds.
Post Report [5 sec]
This item appears only when you set Boot Logo Display to [Disabled]. This item allows you
to select a desired post report waiting time. Configuration options: [1 sec] ~ [10 sec] [Until
Press ESC].
ASUS B85M-G
E9884_B85M-G_v4_Manual.indb 37
All USB devices will not be available until OS boot up for a
fastest POST time.
All USB devices will be available during POST. This process will
extend the POST time.
For a faster POST time, only the USB ports with keyboard and
mouse connections will be detected.
For a faster POST time, PS/2 devices will only be available when the
system boots up or rebooted when the PS/2 devices have not been
reconnected or changed. If you disconnect or change PS/2 devices before
restarting the system, PS/2 devices will not be available and BIOS setup
program will not be accessible via PS/2 devices.
circumstances. This process will extend POST time.
For the fastest POST time, all PS/2 devices will not be available until your
computer enters the operating system.
Select to skip the network stack driver from loading during POST.
Select to load the network stack driver during POST.
Returns to normal boot on the next boot after AC power loss.
Accelerates the boot speed on the next boot after AC power loss.
Boot Logo Display [Auto]
Automatically adjust the boot logo size for Windows requirements.
Maximize the boot logo size.
Hide the boot logo during the POST (power‑on self‑test).
This feature will only work under normal boot.
2‑37
2014/11/4 11:09:58