[Protect] - Panasonic Lumix DMC-F3 Operating Instructions Manual

You can set Protection for pictures you do not want to be deleted by mistake.
Select [PROTECT] on the [PLAYBACK] Mode menu.
Press 3/4 to select [SINGLE] or [MULTI] and then
press [MENU/SET].
Select the picture, and then press
[MENU/SET].
When [MULTI] has been selected
• Repeat these steps for each picture.
• The settings are canceled when [MENU/
SET] is pressed again.
Press [‚] to return to the menu screen.
• Press [MENU/SET] to close the menu.
∫ Canceling all the [PROTECT] settings
1 Select [CANCEL] on the screen shown in step
2 Press 3 to select [YES] and then press [MENU/SET].
3 Press [MENU/SET] to close the menu.
• If you press [MENU/SET] while canceling Protection, the canceling will stop halfway.
Note
• The Protect setting may not be effective on other equipment.
• Even if you protect pictures in the built-in memory or a card, they will be deleted if the built-in
memory or the card is formatted.
• Even if you do not protect pictures on a card, they cannot be deleted when the card's
Write-Protect switch is set to [LOCK].
Advanced (Playback)

[PROTECT]

[SINGLE]
Press 2/1 to
select the picture.
2
- 94 -
(P20)
Press 3/4/2/1
to select the
pictures.
and then press [MENU/SET].
[MULTI]