Selecting A Preset Av Mode; Menu Operation; Picture Menu - Sharp Aquos LC-24LE150M Operation Manual

Programme Setup (Continued)
Programme edit
1
Repeat steps 1 to 2 in Auto tuning.
2
Press a /b to select "Programme edit", and
then press ENTER.
3
Press a /b to select which channel to edit.
4
Press ENTER again to edit below items.
H CH (Channel)
Display channel number.
H Label
To enter the name of the channel. Maximum 7
alphanumeric can be input.
• Press a /b: To select a desired alphanumeric.
• Press c / d : To move to the desired alphanumeric
position.
• To exit, press ENTER.
• If the wrong alphanumeric is entered, select [ ] to clear.
H Skip
Channels with "Skip" set to "X" are passed over
s
when using CHr/ even if selected while
watching the image from the TV.
H Sort
Channel position can be sorted freely.
Input setting
H Colour system (AV input mode only)
You can change the colour system to one that is
compatible with the image on the screen. (Auto,
PAL, SECAM, NTSC 3.58, NTSC 4.43)
NOTE
• If "Auto" is selected, colour system is automatically set.
If an image does not display clearly, select another colour
system (e.g. PAL, NTSC 4.43).
• "Colour system" is selectable only when inputting a
composite signal.
H Label
To enter the name of the channel. Maximum 7
alphanumeric can be input.
• Press a /b: To select a desired alphanumeric.
• Press c / d : To move to the desired alphanumeric
position.
• To exit, press ENTER.
• If the wrong alphanumeric is entered, select [ ] to clear.

Selecting a preset AV Mode

"AV mode" gives you several viewing options to
choose from to best match the system environment,
which can vary due to factors like room-brightness,
type of programme watched or the type of image
input from external equipment.
1
Press AV MODE.
2
Each time you press AV MODE, the mode
changes.
• You can also switch the mode in the "AV mode"
menu on the "Picture" menu screen.
Selected item Description
Standard For a highly defi ned image in a normally
bright room.
Movie For a movie.
Dynamic For a clear-cut image emphasising high
contrast for sports viewing.
Dynamic Changes the image and sound settings to
(fi xed) the factory preset values. No adjustments
are allowed.
PC For PC. (Available only when receiving a
PC signal via INPUT 1 (HDMI) terminal.)
NOTE
• You can select a different AV mode item for each input
mode. (For example, select Standard for TV input and
Dynamic for VIDEO input.)

Menu operation

1
Press MENU and the MENU screen displays.
AV mode
Backlight
Contrast
Brightness
Colour
Tint
Sharpness
Colour temp.
2 Press c / d to select the desired menu. (Picture,
Audio, Setup, Function)
3
Press a /b to select the desired menu item.
Press ENTER to proceed if necessary.
4 Press a /b or c / d to select the desired item
or adjust the item to the desired level. Press
ENTER if necessary.
9 10

Picture menu

AV mode
Backlight
Contrast
Brightness
Standard
+ 8 Colour
30 Tint
0 Sharpness
+ 8 Colour temp.
0
+ 2
c High db
H Picture adjustments
Enter
Selected item
Backlight The screen dims
Contrast For less contrast
Brightness For less brightness For more
Colour For less colour
intensity
Tint Skin tones become
reddish
Sharpness For less sharpness For more
H Colour temp. (Colour temperature)
Adjusts the colour temperature to give the best white
image.
Selected item
High
Middle
Low
H DNR (Digital Noise Reduction)
Reduces noise on screen and produces a clearer
video image. (Off, Low, Middle, High)
NOTE
• For resetting all Picture adjustment items to factory preset
values, press a /b to select "Reset", press ENTER, press
a /b to select "Yes", and then press ENTER.
Standard
+ 8
30
0
+ 8
0
+ 2
c High db
Enter
c button d button
The screen
brightens
For more contrast
brightness
For more colour
intensity
Skin tones become
greenish
sharpness
Description
White with bluish tone
White with reddish tone