Disassembly; Removing And Replacing The Battery Cover - Motorola V80 Service Manual

Disassembly

Disassembly
G
G

Removing and Replacing the Battery Cover

E
20
The procedures in this section provide instructions for the disassembly of a V80
telephone. Tools and equipment used for the phone are listed in Table 1, preceding.
Many of the integrated devices used in this phone are vulnerable to damage from
electrostatic discharge (ESD). Ensure adequate static protection is in place when
handling, shipping, and servicing the internal components of this equipment.
Avoid stressing the plastic in any way to avoid damage to either the plastic or
internal components.
All batteries can cause property damage and/or bodily injury such as burns if a
conductive material such as jewelry, keys, or beaded chains touch exposed terminals.
The conductive material may complete an electrical circuit (short circuit) and
become quite hot. Exercise care in handling any charged battery, particularly when
placing it inside a pocket, purse, or other container with metal objects.
1. Ensure the phone is turned off.
2. Press in and hold the battery cover latch as shown in Figure 4.
Figure 4. Removing the Battery Cover
3. Lift the battery cover completely off the phone.
4. To replace, align the battery cover with the phone.
5. Slide the bottom end of the battery cover into position.
6. Press the top end of the battery cover onto the phone until the battery cover
latch is secure.
April 14, 2004
V80
020200o
6809471A72-O