Sony TRINITRON KV-13FM12 Service Manual page 10

TV and Satellite Receiver
2
Satellite receiver
1
SATELLITE IN
AUDIO R AUDIO L VIDEO
Satellite
antenna
LINE OUT
cable
3
1
Connect the cable from your satellite antenna to SATELLITE IN on
your satellite receiver.
2
Connect the coaxial cable from your cable service or antenna to the
VHF/UHF jack on your TV.
3
Using A/V cables, connect AUDIO and VIDEO OUT on your
satellite receiver to AUDIO and VIDEO IN on your TV.
You can use the button to switch between the VHF/UHF and VIDEO
inputs.
Rear of TV
From
cable/
antenna
VHF/UHF
IN
OUT
7
TV, Satellite Receiver, and VCR
Satellite
antenna
cable
1
4
VCR
SATELLITE IN
VHF/UHF
AUDIO R A UDIO L VIDEO
AUDIO R A UDIO L VIDEO IN
OUT
LINE IN
LINE OUT
Satellite receiver
LINE OUT
5
1
Connect the cable from your satellite antenna to SATELLITE IN on
your satellite receiver.
2
Connect the coaxial cable from your cable service or antenna to the
IN jack on your VCR.
3
Using a coaxial cable, connect the OUT jack on your VCR to the
VHF/UHF jack on your TV.
4
Using A/V cables, connect AUDIO and VIDEO OUT on your
satellite receiver to AUDIO and VIDEO IN on your VCR.
5
Using A/V cables, connect AUDIO and VIDEO OUT on your VCR to
AUDIO and VIDEO IN on your TV.
To view from the satellite receiver or VCR, select the video input to which
your VCR is connected by pressing
8
Rear of TV
From
cable/
antenna
2
VHF/UHF
IN
OUT
3
on the remote control.