Active Bending Lights - Volvo XC 90 Owner's Manual

•
When there are vehicles on connecting
roads
•
At the top of hills or in dips in the road
•
In sharp curves
Auxiliary lights*
If the vehicle is equipped with auxiliary lights, the
driver can use the center display to activate/
deactivate them or decide if they will go on/off
10
along with the high beams .
Related information
•
City Safety™ troubleshooting (p. 273)
•
Lighting panel and controls (p. 129)
10 These lights must be connected to the vehicle's electrical system by a trained and qualified Volvo service technician.
The factory default setting is on.
11

Active Bending Lights*

Active Bending Lights (ABL) are designed to
help light up a curve according to movements of
the steering wheel.
Headlight pattern with the Active Bending Light function
deactivated (left) and activated (right)
11
ABL is activated automatically when the engine
is started and can be deactivated in the center
display.
If a fault is detected in the system, the
symbol in the instrument panel will illuminate. A
text message will be displayed and an additional
symbol will also illuminate.
INSTRUMENTS AND CONTROLS
NOTE
This function is only active in twilight or dark
conditions, and only when the vehicle is in
motion.
Deactivating/activating the function
ABL can be deactivated/activated in two ways in
the center display:
Via Function view
Active Bending
Tap the
Lights
button.
Via settings
Settings
1. Tap in Top view.
2. Tap
My Car Lights Exterior
Active Bending Lights
3. Deselect/select
Related information
•
Settings view (p. 102)
* Option/accessory, for more information, see Introduction.
Lights.
.
133