Digi+ Power Control - Asus Rampage V Extreme Manual

DIGI+ Power Control

ASUS DIGI+ Power Control features the revolutionary and innovative digital VRM and DRAM
voltage controllers. These controllers offer ultra-precise memory and voltage tuning for
optimal system efficiency, stability, and performance.
The following screens are for reference only. Configuration options varies depending on the
motherboard model.
Click or tap to switch
between screens
VRM Phase Control
Increase the number of active phases under a heavy system load to get better
transient and thermal performance. Reduce the number of active phases under a
light system load to increase efficiency.
VRM Frequency
Enables spread spectrum to enhance system stability.
CPU OTP Capability
Increase the CPU's maximum operating temperature to extend the overclocking
tolerance to increase overclocking potential.
Vcore Current Capability
Vcore Current Capability allows users to control the total power range for
overclocking. A higher value correlates to a wider total power range and extends
the overclocking frequency range.
Vcore Load-line Calibration
Vcore Load-line Calibration adjusts the voltage range of the CPU load-line.
Increase the value for better performance and decrease the value for better
efficiency.
VRM Duty Control
VRM Duty Control adjusts the operating current and thermal condition of each
phase component.
Active Frequency Mode
Active Frequency Mode allows you to enhance the power saving condition of the
CPU. Tick ON to get a quicker transient response while saving the CPU power.
ASUS RAMPAGE V EXTREME
Click or tap to undo Click or tap to
the changes apply the changes
4-11