Brother ADS-2100e Quick Start Manual page 17

For Wireless Network Users (ADS-2600We only)
Error Code
The Authentication/Encryption methods used by the selected wireless access point/router
are not supported by your machine.
For infrastructure mode, change the authentication and encryption methods of the wireless
access point/router. Your machine supports the following authentication methods:
Authentication Method
TS-04
If your problem is not solved, the SSID or network settings you entered may be incorrect.
Reconfirm the wireless network settings. See How can I find the wireless security
information (SSID* and Network Key**)? on page 16.
For ad-hoc mode, change the authentication and encryption methods of your computer for
the wireless setting. Your machine supports Open authentication method only, with
optional WEP encryption.
The security information (SSID/Network Key) is incorrect.
Confirm the SSID and security information (Network Key). See How can I find the wireless
TS-05 security information (SSID* and Network Key**)? on page 16.
If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother
machine supports the use of the first WEP key only.
The wireless security information (Authentication method/Encryption method/Network
Key) is incorrect.
Confirm the wireless security information (Authentication method/Encryption method/
TS-06 Network Key) using the Authentication Method table in error TS-04. See How can I find the
wireless security information (SSID* and Network Key**)? on page 16.
If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother
machine supports the use of the first WEP key only.
The machine cannot detect a wireless access point/router that has WPS or AOSS™ enabled.
To configure your wireless settings using WPS or AOSS™, you must operate both your
machine and the wireless access point/router.
Confirm that your wireless access point/router supports WPS or AOSS™, and try starting
step 7 on page 15 again.
TS-07
If you do not know how to operate your wireless access point/router
using WPS or AOSS™, see the documentation provided with your
wireless access point/router, ask the manufacturer of your wireless
access point/router, or ask your network administrator.
Two or more wireless access points that have WPS or AOSS™, enabled are detected.
Confirm that only one wireless access point/router within range has the WPS or AOSS™
TS-08 method active and try again.
To avoid interference from other access points, after a few minutes, try again starting from
step 7 on page 15.
The machine is still trying to connect to your wireless network. Please wait a few minutes,
TS-20
and then check the WLAN status.
Recommended Solutions
WPA-Personal
WPA2-Personal
Open
Shared key
Encryption Method
TKIP
AES
AES
WEP
None (without encryption)
WEP
17