Ae-2000 Operation - Linear AE-2000 Installation Instructions Manual

AE-2000 Operation

Resident Access with an Entry Code
KEY IN AN ENTRY CODE AT THE SYSTEM KEYPAD
OR ENTER A CODE AT A REMOTE KEYPAD
IF THE CODE IS ENTERED WRONG, PRESS THE
KEY TO RESET THE KEYPAD AND RE-ENTER
THE CORRECT CODE (USE THE KEY TO RESET
REMOTE KEYPADS)
- OR -
IF THE SYSTEM IS DISPLAYING THE DIRECTORY NAMES,
PRESS THE KEY FIRST, BEFORE KEYING IN AN
ENTRY CODE
• Residents have up to 40 seconds to key in their entry code.
• Up to eight seconds are allowed between each keystroke.
• If the code is entered wrong, press the
keypad and re-enter the correct entry code. (On remote keypads,
press the key to reset the keypad.)
• If the system is displaying the directory names, press the
fi rst, before keying in the entry code.
• After a correct code is entered, and if the conditions for granting
access are fulfi lled, the programmed relay will activate for the
programmed time.
• If the number of incorrect codes entered exceeds the keypad
lockout count, the keypad will be locked and not accept any entries
for one minute.
• If the Anti-passback feature is enabled, the entry code will be
unusable until the anti-passback time expires.
Resident Access with a Wireless Transmitter
ACTIVATE TRANSMITTER
• Activate a wireless transmitter within radio range of the AE-2000's
antenna.
• After a valid transmitter is decoded, and if the conditions for
granting access are fulfi lled, the programmed relay channel will
activate for the programmed time.
• If the Anti-passback feature is enabled, the transmitter will become
unusable until the anti-passback time expires.
18
Visitor Access with a Resident Call
PRESS THE
TO SCROLL THROUGH THE RESIDENT'S NAMES
TO SCROLL THROUGH FASTER, PRESS AND HOLD
THE
THE KEY WHEN THE DESIRED LETTER IS UNDERLINED
WITH THE RESIDENT DIRECTORY DISPLAYED,
ENTER THE RESIDENT'S DIRECTORY NUMBER TO
PLACE A TELEPHONE CALL TO THE RESIDENT
IF THE VISITOR ALREADY KNOWS THE RESIDENT'S
DIRECTORY NUMBER, THEY CAN PRESS THE
THEN ENTER THE DIRECTORY NUMBER WITHOUT
VIEWING THE DIRECTORY DISPLAY
PRESSING THE
WILL CANCEL THE CALL IN PROGRESS
key to reset the
THE RESIDENT TALKS TO THE VISITOR
AND CAN GRANT OR DENY ACCESS
USING THEIR TELEPHONE KEYS
key
• Press the
• To scroll through the alphabet faster and choose which letter to
• With the resident directory displayed, the visitor enters the
• If the visitor already knows the resident's directory number, they
ANTENNA
• The system will dial the resident's telephone number to establish
✦ NOTE: The resident's telephone number will never be displayed to
• If the resident is using the telephone at the same time a visitor
• The resident answers the call and converses with the visitor to
• The resident can use their telephone's keypad to grant access
• The resident can disconnect the visitor without granting access by
✦ NOTE: The telephone keys that the resident presses can be
• The length of time the visitor is allowed to talk can be programmed
KEY BELOW THE OR
- OR -
KEY BELOW OR THEN RELEASE
KEY DURING A TELEPHONE CALL
RELAY "A"
RELAY "B"
DISCONNECT
key below the
scroll through the resident's names alphabetically and display their
associated directory number.
view, press and hold down the
arrow. Release the key when the desired letter is underlined.
directory number to place a call to the resident.
can press the key then enter the directory number without
viewing the directory display.
2-way communications.
the visitor.
calls, the system will indicate to the visitor that the line is busy.
determine if access will be granted.
activating Relay Channel "A" by pressing
Channel "B" by pressing . After access is granted, the system
will disconnect the visitor and resident call.
pressing or by hanging up.
customized for the installation.
from 15-255 seconds. The resident will hear a series of beeps
during the last 10 seconds of talk time. To restart the talk timer, the
resident can press on their telephone.
REPEATEDLY
KEY
VISITOR
RESIDENT
or arrow repeatedly to
key below the or
, or activating Relay