Panasonic SDR-S10P Operating Instructions Manual page 61

Recording
To set the white balance
manually
1
Select
[A]
and then
fill the
screen with a white subject.
2
Press the cursor button up to
select
[A].
Do not cover the white balance sensor
during recording or it may not function
properly.
• When the [tills] display flashes, the
manual white balance previously
adjusted is stored.
Whenever recording conditions
change, re-set the white balance for
correct adjustment.
• When setting both the white balance
and the iris/gain, set the white balance
first.
When the [tills] display changes from
flashing to on, setting is complete .
• When the
[A]
display continues
flashing, the white balance cannot be
set because the place is dark, etc. In
this case, use the automatic white
balance.
• About the white balance
sensor
0
-~-o
The white balance sensor detects the
type of light source during recording.
.--.··,···.···.·· ···' · ·. . ·r".·"·. . ,
n.' ..,
61
VQT1D97