Inserting/Removing An So Card - Panasonic SDR-S10P Operating Instructions Manual
Sd video camera
Hide thumbs
Also See for SDR-S10P:
- Operating instructions manual (136 pages) ,
- Service manual (52 pages) ,
- Service manual (52 pages)
Table of Contents
Advertisement
Setup
Inserting/removing
an SO card
Be sure to set the mode dial to OFF
before inserting/removing an SO card.
If the SO card is inserted or removed
while the power is on, this unit may
malfunction or the data recorded on
the SO card may be lost.
1
Set the mode dial to OFF.
• Check that the status indicator has
gone off.
2
Slide the card/battery door
lock in the direction of the
arrow and then open the card/
battery door.
lOCK 0 OPfH
CD
-
-~-
1---____
3
Insert/remove the SO card
into/from the card slot.
• When inserting an SO card, place the
label side
0
upwards and press it
straight in as far as it goes.
• When removing the SO card, press the
center of the SO card and then pull it
straight out.
4
Close the card/battery door
and then slide the card/battery
door lock in the direction of
the arrow.
LOCK4DoOPEH
lI
