Board; Service Position To Check The Camera Section - Sony DCR-TRV940 Service Manual

2-20.JK-222 BOARD
2 Open the jack cover.
1 Flexible board
(CN4005)

[SERVICE POSITION TO CHECK THE CAMERA SECTION]

Connection to Check the Camera Section
To check the camera section, set the camera to the Forced camera power ON mode.
Operate the camera functions of the zoom and focus using the adjustment remote commander (with the HOLD switch set in
the OFF position).
AC power
AC IN
adaptor
Battery panel block
DB-014 board
FP-498 flexible board
VC-288 board
Mechanism deck
Extention cable
(J-6082-466-A)
Lens block
5 Screw
(M1.7
Setting the Forced Camera Power ON mode
1) Select page: O, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 01 and
Exiting the Forced Camera Power ON mode
1) Select page: O, address: 01, and set data: 01.
2) Select page: D, address: 10, data: 00, and press the PAUSE
3) Select page : 0, address: 01, and set data: 00.
FP-499 flexible board
D B
- 0 1
4
2-13
DCR-TRV940/TRV940E/TRV950/TRV950E
6 JK-222 board
3 Two screws
(M1.7
4 Screw
×
4)
(M1.7
press the PAUSE button of the adjustment remote
commander.
button of the adjustment remote commander.
JK-222 board
J K
- 2 2
2
Adjustment remote
commander (RM-95)
CD-389 board
×
4)
×
4)
Monitor