09 Wheels and tires
||
09
NOTE
Do not remove any foreign objects (nails,
etc.) from the tire before using the sealing
system.
•
Stage 2: The tire's inflation pressure is
checked and adjusted if necessary.
WARNING
•
Never leave the tire sealing system
unattended when it is operating.
•
Keep the tire sealing system away
from children.
•
Be sure the vehicle is parked safely off
the road and away from moving traffic.
•
Apply the parking brake.
Related information
•
Tire sealing system* – overview (p. 300)
•
Tire sealing system* – inflating tires
(p. 304)
•
Tire sealing system* – sealing compound
container (p. 305)
•
Tire sealing system* – sealing hole
(p. 301)
•
Tire sealing system – checking inflation
pressure (p. 303)
•
Tunnel console – 12-volt sockets (p. 134)
*
300
Option/accessory, for more information, see Introduction.
Tire sealing system* – overview
Certain models are equipped with a tire
sealing system* that enables you to tempo-
rarily seal a hole in the tread surface and re-
inflate a flat tire, or to adjust a tire's inflation
pressure.
Speed limit sticker (on the rear side of the
compressor)
On/Off switch
Electrical wire
Bottle holder (orange cover)
Protective hose cover
Air release knob
Hose
Bottle with sealing compound
Air pressure gauge