Balance/Scale Operating Menu (Overview) - Sartorius BL150S Operating Instructions Manual

Balance/Scale Operating Menu (Overview)

o Factory setting
√ User setting
Menu 1. Balance/
scale functions
2. Application
programs
3. Application
parameters
5. through 7.
8. Extra functions
9. Reset menu
* = Gold scales only
1.1. Adapt filter
1.3. Stability range
1.4. Weight unit for
calibration weight**
1.6. Auto zero
1.7. Weight unit 1
1.8. Display accuracy 1*
2.1. Program selection
3.1. Weight unit 2
3.2. Display accuracy 2*
3.3. Reference qty or %
applies only if an interface is installed; see the corresponding instructions
8.1. Menu
8.2. External switch
function
8.3. Power-on mode
9.–1Factory settings
lite
** = Basic balances only
1.1.1 Minimum vibration
o Normal vibration
1.1.2
1.1.3 Strong vibration
1.1.4 Extreme vibration
1.3.1 1/4 digit
1.3.2 1/2 digit
1.3.3 1 digit
o 2 digits
1.3.4
1.3.5 4 digits
o Grams
1.4.1
1.4.2 Kilograms
1.4.3 Pounds
o On
1.6.1
1.6.2 Off
See "Toggle between Weight Units"
o Standard resolution
1.8.1
1.8.3 High resolution
see the desired application program
description
see "Toggle between Weight Units"
o Standard resolution
3.2.1
3.2.3 High resolution
see the desired application program
description
o Parameter settings alterable
8.1.1
8.1.2 Parameter settings read only
8.2.3 applicable only if an interface
is installed; see the corres-
ponding instructions
8.3.1 Off/on
o Stand-by/on
8.3.2
9.– 1 Reset
o Do not reset
9.– 2
17