Balance/Scale Operating Menu (Overview) - Sartorius Basic lite Operating Instructions Manual

Balance/Scale Operating Menu (Overview)

ο Factory setting
√ User setting
Menu 1. Balance/
scale functions
2. Application
programs
3. Application
parameters
5. through 7.
8. Extra functions
9. Reset menu
* = only for GM models
** = only for BL models
1
) = not for models with a readability of 0.1 mg⁄
1.1. Adapt filter
1.3. Stability range
1.4. Weight unit for
calibration weight**
1.6. Auto zero
1.7. Weight unit 1
1.8. Display accuracy
2.1. Program selection
3.1. Weight unit 2
3.2. Display accuracy
3.3. Reference qty or %
applies only if an interface is installed; see the corresponding instructions
8.1. Menu
8.2. External switch function
8.3. Power-on mode
9.– Factory settings
1.1.1 Minimum vibration
ο Normal vibration
1.1.2
1.1.3 Strong vibration
1.1.4 Extreme vibration
1.3.1 1/4 digit
1.3.2 1/2 digit
1.3.3 1 digit
1.3.4 ο 2 digits
1.3.5 4 digits
1.4.1 ο Grams
1
1.4.2 Kilograms )
1.4.3 Pounds
1.6.1 ο On
1.6.2 Off
See "Toggle between Weight Units"
1.8.1 ο Standard resolution
1.8.3 Increased resolution
see the desired application program
description
see "Toggle between Weight Units"
3.2.1 ο Standard resolution
3.2.3 Increased resolution
see the desired application program
description
8.1.1 ο Parameter settings: alterable
8.1.2 Parameter settings: read only
applies only if an interface is installed;
see the corresponding instructions
8.3.1 Off/on (battery shuts off
automatically after 3 min)
8.3.2 ο Standby/on
9.– 1 Reset
9.– 2 ο Do not reset
19