Refitting The Intake Manifold; Splitting The Crankcase Halves; Crankcase - Crankshaft - PIAGGIO Carnaby 125 Service Station Manual

Engine

Refitting the intake manifold

Fit the intake manifold and do up the three screws.
N.B.
USE COMMERCIALLY AVAILABLE INSERTS AND INSERT
HOLDERS FOR THE SPECIAL SCREWS FOR 125 CM³
MODELS.

Crankcase - crankshaft

Splitting the crankcase halves

engine crankcase opening
ble>
- First remove the following
units:
transmission cover, driving
pulley, driven pulley and belt,
rear hub cover, gears, bear-
ings and oil seals as descri-
bed in the transmission
chapter.
-Remove the oil sump, the by-
pass, the chain compartment
cover and the oil pump as in
the lubrication chapter.
ENG - 154
Carnaby 125 - 200