Safety Release Lock; Using The Built-In Flash; In A Basic Zone Mode; In A Creative Zone Mode - Canon EOS Rebel T2 Instruction Manual

This orevents shutter release if there is no film loaded or if there is no lens
attached. lt is particularly effective against missed shots due to no film.
lf vou Dress the shutter button while there is no film in the camera or no lens
atiachbd, 'no F " 1F: filml or " no L " (L: lens) will blink in the viewfinder and on
the LCD panel.
,( More the <)> arrqfl to the
| <sfl> icon.
. While looking at the LCD panel, press the
<FUNC
> button (66)
)
s"t it to',."
tu . Turn the <tfft> dial
. To cancel the setting, set it to "lr."
Using the Built-in Flash
sOSafety Release Lock
With E-TTL ll autoflash, high-precision and consistent flash exposures can be
obtained
ln a lla€ic Z.Qhe, n/[ode,
In lowlight or backlitconditions, the built-in flash will pop up and fire automatically
(except in <I> <<> <El> modes)
In aCreativ6Zone'Mode
Press the <t> button to pop up the built-in flash.
P
r Use this mode for automatic llash photography The llash sync speed
(1/60- 1 /1 25 sec.) and aperture value will be set automatically as with the
<LJ> tFull Aulol mooe.
Tv
: Use this mode il you want to set the flash sync sPeed manually (within 30
sec. - 1 /1 25 sec.) The camera will set the tlash aperture value
automatically to obtain a correct flash exposure,