Driveshaft Bearing - Polaris 600 Switchback Owner's Manual

MAINTENANCE
Hood/Side Panel
The hood and side panels of the
snowmobile protect the operator
from moving parts. Never operate
Strap
a snowmobile with the side panels
open or removed. Always ensure
that the hood and side panels are
securely in place before starting
the engine.
To open a side panel, rotate the
two 1/4-turn fasteners at the upper
edges of the side panel. Release
the side panel strap at the lower
edge of the panel.
To remove an open side panel, pull
1/4-Turn Fasteners
the panel outward to release the
tabs at the lower edge of the panel.
Removing the hood is not recommended. Any service requiring the
removal of the hood should be performed by an authorized POLARIS
dealer.
Lubrication
Rear Shock Body Threads
Lubricate rear shock body threads
seasonally with a low-temperature
synthetic grease.
Threads

Driveshaft Bearing

This model has sealed bearings that
require no additional lubrication.
85