Table of Contents
Advertisement
Search for Bluetooth Devices
The Bluetooth Device Selection window
will attempt to search for any Bluetooth
devices in the area.
Note: If you wish not to continue
searching now, you may click
go back to Step 6
Select Bluetooth Device to configure
If devices have been found, they will be
shown as an icon corresponding to the
type of device.
If the device you are searching for is not
turned on, you may switch the device on
and click
The drop down menu will allow you to
reduce the search to a specific group,
unless you are sure of the group your
device is in, (recommended) select Show All Devices.
Select the icon of the device you wish to connect to and click
Note: A device needs to be selected before Next button can be clicked on.
Initial Setup
and
Note: You can only select one at a time, you will be able to
repeat this process later.
Figure 3.7 Device Selection
Figure 3.8 Found Devices
I n s ta l l at i o n 0 0 5
Initial Setup 017
Advertisement
Table of Contents
