Hooking Up The System Securely; Setting The Clock - Sony HCD-GT444 Service Manual

HCD-GT111/GT222/GT444/GT555
QQ
3 7 63 1515 0
Remote RM-AMU006
Getting Started

Hooking up the system securely

ANTENNA
a)
TE
L 13942296513
DMPORT
SUBWOOFER
c)
VOLTAGE
SELECTOR
FRONT SPEAKER
To FM lead antenna
To AM loop antenna
To subwoofer
To front speaker (left)
To front speaker (right)
a)
The FM 75 Ω COAXIAL jack varies according to
models.
c)
HCD-GT555 and HCD-GT444 only.
d)
The VOLTAGE SELECTOR varies according to
models.
Antennas
Find a location and an orientation that
provide good reception, and then set up
the antennas.
AM loop antenna
Extend the FM lead
antenna horizontally
www
Keep the antennas away from the speaker
cords, the power cord and the USB cable
to avoid picking up noise.
.
8
http://www.xiaoyu163.com
(on/standby)
Press to turn on the system.
CLOCK/TIMER SELECT
CLOCK/TIMER SET
Press to set the clock and the timers.
REPEAT/FM MODE
Press to listen to a disc, an USB device, a
single track or file repeatedly.
Press to select the FM reception mode
(monaural or stereo).
USB
Press to select the USB function.
CD
Press to select the CD function.
TUNER/BAND
Press to select the TUNER function.
Press to select the FM or AM band.
FUNCTION
Press to select a function.
(go back/go forward)
Press to select a track or file.
Subwoofer (HCD-GT555 and
HCD-GT444 only)
Be sure to insert the connector straight
into the terminals.
Purple
Front speakers
Be sure to insert the connector straight
d)
into the terminals.
White
VOLTAGE SELECTOR
For models with a voltage selector, set
VOLTAGE SELECTOR to the local
power line voltage.
Power
Connect the power cord to a wall socket.
The demonstration appears in the display.
If the plug does not fit the wall socket,
detach the supplied plug adaptor (only for
models equipped with an adaptor).
When carrying this system
Use the buttons on the unit for this
operation.
1
Remove all discs to protect the CD
mechanism.
2
Press CD to select the CD function.
3
Hold down DISC SKIP/
EX-CHANGE, and press
"STANDBY" appears.
4
After "MECHA LOCK" appears,
unplug the power cord.
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
(rewind/fast forward)
Press to find a point in a track or file.
+/– (tuning)
Press to tune in the station you want.
(play)
Press to start playback.
(pause)
Press to pause playback.
(stop)
Press to stop playback.
ENTER
Press to enter the settings.
DISC SKIP
Press to select a disc.
+/– (select folder)
Press to select a folder.
VOLUME +/–*
Press to adjust the volume.
* The VOLUME + button has a tactile dot. Use
the tactile dot as a reference when operating
the system.
Speaker pads
Attach the supplied speaker pads to the
bottom of the front speakers and
subwoofer to prevent slipping.
Q Q
3 6 7 1 3 1 5
Front speakers:
4 pads for each speaker
Subwoofer:
4 pads (HCD-GT555 and HCD-GT444
only)
To use the remote
Slide and remove the battery
compartment lid, then, insert the two
supplied R6 (size AA) batteries,
first, matching the polarities shown
below.
Notes
• With normal use, the batteries should last for
about six months.
• Do not mix an old battery with a new one or
mix different types of batteries.
• If you do not use the remote for a long period
of time, remove the batteries to avoid damage
from battery leakage and corrosion.
until
co
.
9 4 2 8
EQ
Press to select a sound effect.
CLEAR
Press to delete the last step from the
program list.
TUNER MEMORY
Press to preset the radio station.
PLAY MODE/TUNING MODE
Press to select the play mode of an
AUDIO CD, MP3 disc or an optional
USB device.
Press to select the tuning mode.
DISPLAY
Press to change the information on the
display.
SLEEP
Press to set the Sleep Timer.

Setting the clock

You cannot set the clock in Power Saving
0 5 8 2 9 9 4 2 8
Mode.
Use the buttons on the remote for this
operation.
1
Press to turn on the system.
2
Press CLOCK/TIMER SET.
If "PLAY SET" appears on the
display, press /
"CLOCK SET" and then press
ENTER (RM-AMU006) or
(RM-AMU008).
3
Press / repeatedly to
set the hour, and then press
ENTER.
4
Use the same procedure to set
the minutes.
side
The clock settings are lost when you
disconnect the power cord or if a
power failure occurs.
To display the clock when the
system is turned off
Press DISPLAY repeatedly until the clock
is displayed. The clock is displayed for
about 8 seconds.
m
9 9
9 9