Reconnecting - Canon EOS REBEL T6S Instruction Manual

Reconnecting

The camera can reconnect to another camera for which connection
settings have been registered.
When settings for multiple connection destinations are registered,

select [Choose set.], select the connection destination, then
connect to the destination.
By default, settings are named after the nickname of the camera that

was connected to.
W-42
Select [Wi-Fi function].
1
Under the [51] tab, set [Wi-Fi/NFC]

to [Enable], then select [Wi-Fi
function].
Select [z].
2
Select [z] (Transfer imgs between

cameras) and press <0>.
Establish a connection.
3
Select [Connect] and press <0>.

On the confirmation dialog, select [OK].

Perform the reconnection procedure

on the target camera as well.

The images on the card are displayed
and the images to send can be selected.