Connect To The Camera - Canon EOS REBEL T6S Instruction Manual

Using Camera Access Point Mode to Establish a Connection
Operation on the Camera-2
The device name set on
Camera Connect
Operation on the Smartphone-2
The settings for communicating with a smartphone are now complete.
You can check or change the device name on the setting screen of Camera
Connect.
W-26

Connect to the camera.

8
When a connection is established,

the screen on the left will appear on
the camera's LCD monitor.
Press the <Z> key to select [OK],

then press <0>.

After a message is displayed, the
camera's LCD monitor will turn off.
Operate the camera using
9
Camera Connect.
Perform further operations using

Camera Connect. For the operation
procedure, see page W-27.