Table of Contents
Advertisement
Repeat A-B Playback
You can Repeat Playback between A and B on a Disc.
1
During Playback, press MODE repeatedly until
2
Press OK at your desired Starting point (A).
3
Press OK at your desired Ending point (B).
Point B should be in the same Title or Track as point A.
●
Within a few seconds, the selection A-B will begin to Play back
●
repeatedly.
4
To Cancel Repeat A-B Playback, press MODE repeatedly until
appears.
Press OK so OFF appears.
Note(s)
Repeat setting (except ALL) will be cleared when moving to another Title or Chapter,
●
Track.
During Programmed Playback, Repeat setting will be effective for the Tracks in the
●
program.
Repeat Playback or Repeat A-B Playback may Not be available with some Discs.
●
Repeat A-B Playback does not function during another Repeat mode.
●
To Cancel Point A, press CLEAR at step 2 in Repeat A-B Playback.
●
Stopping Playback will Cancel Repeat A-B Playback.
●
Random Playback
CD
This function Shuffles the Playing order of Tracks instead of sequential
Playback.
1
In STOP mode, press MODE repeatedly until the RANDOM Menu
appears.
2
Press K (PLAY) to start Random Playback.
Note(s)
To Repeat the current Track in the Random mode, follow the steps 1 and 2 in Repeat
●
Playback and select
TRACK. L p. 36
To Repeat the entire random selections, follow the steps 1 and 2 in Repeat Playback and
●
select
ALL. L p. 36
Programmed Playback
CD
appears.
You may determine the Order in which Tracks will play back.
A B
A B
1
2
A B
A B
3
Press CLEAR to Erase the last Track in the program if you make an error.
●
To Erase all Programmed Tracks at once, select ALL CLEAR and press OK at step 2.
●
While a Program is being Played back, C works as follows:
●
–
–
–
To Repeat the current track in the program, follow the steps 1 and 2 in Repeat
●
Playback and select TRACK. L p. 36
To Repeat the Entire Program, follow the steps 1 and 2 in Repeat Playback and select
●
ALL. L p. 36
Ejecting the Disc or the Unit goes into Standby mode will Erase the program.
●
You cannot use the Number keys to select another Track during Programmed Playback.
●
Use H / G to select other Tracks in the program.
You cannot combine Random Playback with Programmed Playback.
●
You cannot alter a programmed order during Playback.
●
You can start Programmed Playback only while in PROGRAM menu.
●
In STOP mode, press MODE repeatedly until the PROGRAM Menu
appears.
Use H I to Select a desired Track, then press OK to Store it.
Additional Tracks may be on other screens. Use H I to go on to
●
the Next / Previous pages.
Repeat this Step until you have selected all the Tracks you wish to
●
play back in the program.
Up to 99 Tracks can be ordered.
●
If 8 or more Tracks were in a Program, use H / G to see All
●
the Tracks.
Press K (PLAY) to start Programmed Playback.
Note(s)
Pressing C once: The Track will be in the Resume Standby mode. Next time you press
K (PLAY), the Playback will Resume from the Point where it is Stopped in the
Programmed Playback.
Pressing C twice: Resume mode will be Cancelled. Next time you press K (PLAY),
Playback will Restart from the First Track in the Original order. However, your
Programmed Playback can be Restarted when you follow the above steps. (Your
Programs are still Stored until either the Disc is Ejected or the Unit goes into Standby
mode.)
On some Discs, C will not work while the Resume message appears. Please wait until
the Message disappears.
37
.
English
Continued on next page.
Advertisement
Table of Contents
