Parental Setting; Others; Reset To The Default Setting - Magnavox 28MD304V Owner's Manual

Parental Setting

Parental setting prevents your children from viewing inappropriate
material. (password protected.) Playback will stop if the ratings exceed
the levels you set.
1
In STOP mode, press DVD SETUP and use J K to select
PARENTAL.
2
Use the NUMBER keys to enter your personal 4-digit password,
then press OK.
PARENTAL
PASSWORD
Please enter a 4-digit password.
OK
If you have set the password already, use the NUMBER keys to
●
enter the current 4-digit password.
You cannot use the default password (4737) to Play back a DVD.
●
3
Use H I to select the PARENTAL LEVEL, then press OK.
4
Use H I to select the desired item, then press OK.
PARENTAL LEVEL
ALL
All Parental Locks are cancelled.
All Ratings (Adult / General / Children) can be
8 [ADULT]
Played back.
7 [NC-17] to 2 [G] Only DVD intended for general use and children
can be Played back.
Only DVD intended for children can be Played
1 [KID SAFE]
back.
To change the password
5
At step 3, use H I to select PASSWORD CHANGE then press
OK.
6
Use the NUMBER keys to enter the new 4-digit password.
Note(s)
DVD-video may not respond to Parental Lock settings. Make sure this function works with
●
your DVD-video.
Record the Password in case you forget it.
●
If you forget the Password, press 4, 7, 3, 7, then enter your New Password. Password will
●
be cleared and Parental Levels will be set to ALL. Go to step 3 to reset PARENTAL
LEVEL.
A Power failure will Not Erase your Password.
●

Others

You can change the Others functions.
1
In STOP mode, press DVD SETUP and use J K to select
OTHERS.
2
Use H I to select the desired item, then press OK.
OTHERS
ANGLE ICON
STILL MODE
AUTO POWER OFF
OK
3
Adjust the following items.
ANGLE ICON
Set to ON to show the Angle Icon when Multiple Camera Angles are
available during DVD Playback.
STILL MODE
Set the Picture quality in the Still mode.
If you select AUTO, it automatically selects the Best Resolution setting
(FIELD or FRAME) based on the Data Characteristics in the Pictures.
FIELD
The picture in the Still mode will be stabilized.
The picture in the Still mode will be highly
FRAME
defined.
AUTO POWER OFF
Set to ON. If there is no operation for 15 minutes, the Unit goes into
Standby Mode.

Reset to the Default Setting

You can Reset All the Settings except for the Parental Setting and On-
screen Menu Language.
1
In STOP mode, press DVD SETUP and use J K to select
INITIALIZE.
2
Use H I to select YES, then press OK.
INITIALIZE
Initialize?
NO
YES
OK
Note(s)
When you want to Cancel the Initialization, select NO, then press OK.
●
32 .
English
ON
AUTO
ON
Continued on next page.