Dodge Challenger 2013 User Manual page 109

Component
Axle Rear– 3.6L Engine
Brake Master Cylinder
Power Steering Reservoir
Fuel Selection– 3.6L Engine
Fuel Selection– 5.7L Engine
• Mixing of engine coolant (antifreeze) other than specified Organic Additive Technol-
ogy (OAT) engine coolant (antifreeze), may result in engine damage and may de-
crease corrosion protection. Organic Additive Technology (OAT) engine coolant is
different and should not be mixed with Hybrid Organic Additive Technology (HOAT)
engine coolant (antifreeze) or any "globally compatible" coolant (antifreeze). If a
non-OAT engine coolant (antifreeze) is introduced into the cooling system in an
emergency, it should be flushed with OAT coolant and replaced with the specified
OAT engine coolant (antifreeze) as soon as possible.
• Do not use water alone or alcohol-based engine coolant (antifreeze) products. Do not
use additional rust inhibitors or antirust products, as they may not be compatible
with the radiator engine coolant and may plug the radiator.
• This vehicle has not been designed for use with propylene glycol-based engine
coolant (antifreeze). Use of propylene glycol-based engine coolant (antifreeze) is not
recommended.
E-85 FLEXIBLE FUEL– (3.6L Engine Only)
• Refer to your Owner's Manual on the DVD for further details.
Only vehicles with the E-85 fuel filler door label or a yellow gas cap can operate on E-85.
MAINTAINING YOUR VEHICLE
Fluid, Lubricant, or
Genuine Part
We recommend you use API
GL-5 SAE 75W140 Synthetic
Gear Lubricant.
We recommend you use
MOPAR® DOT 3 and
SAE J1703. If DOT 3 is
not available, then DOT 4 is
acceptable.
We recommend you use
MOPAR® Hydraulic Fluid
meeting Chrysler Material
Standard MS-11655.
87 Octane Acceptable.
89 Octane Recommended
91 Octane Recommended
CAUTION!
CAUTION!
Capacities
—
—
—
19.1 Gallons (72 Liters)
(Approximate)
19.1 Gallons (72 Liters)
(Approximate)
107