Automatic Rinse/Self-Cleaning Cycle - Saeco Intuita HD8750 User Manual

2 Press the " " button to start the cycle. The machine starts the au-
tomatic priming of the circuit by dispensing some water through the
steam wand.
3
When the process is complete, the"
The machine is warming up.

Automatic Rinse/Self-Cleaning Cycle

When warm-up is completed, the machine automatically performs a rinse/
self-cleaning cycle of the internal circuits with fresh water. This takes less
than a minute.
4 Place a container under the dispensing spout to catch the small
amount of dispensed water.
5 The " " and " " buttons blink during the entire process.
6 Wait for the cycle to fi nish automatically.
Note:
You can stop the dispensing process by pressing either the "
button.
7 When the above steps are complete, check that the "
and " " lights are blinking.
ENGLISH
" and " " buttons will blink.
" or the "
", " ", "
13
"
"