Front Fog Lights; Side Turn Signal Lights; Reverse Lights, Tail Lights; Signal Lights - Chevrolet Sail U-VA Owner's Manual

Front Fog Lights

*
Caution
This service requires special
equipment.
If you are not confident you can
complete it safely, you must have
this job done by your CHEVROLET
retailer.
Otherwise personal injuries or
damage to your vehicle could be
caused.
Warning
The same rating of the bulb to be
used during replacement and any
usage of higher wattage bulbs can
cause thermal issues such as melting
of lamp housing and its surrounding
parts. Warranty would be void if
higher wattage bulbs are being used.

Side Turn Signal Lights

Bulb replacement
1. Remove the wheel arch panel.
2. Turn the bulb socket counter clock
wise to remove it. (Both the bulb
and the socket are connected to the
vehicle wiring harness.)
3. Pull the bulb straight out of the
socket.
4. Install a replacement bulb of the
same rating.
5. Insert the socket into the lamp and
turn it clockwise.
6. Refit the wheel arch panel.

Reverse Lights, Tail Lights,

Stoplights and Rear Turn Signal
Lights
Bulb replacement
HEX0130
1. Open the tailgate, remove the
tailgate trim panel next to the lights.
2. Remove one tail light nut in the
tailgate trim panel and two tail light
screws next to the tailgate, and
remove the tail light assembly.
3. Turn the bulb socket counter clock-
wise to remove it.
Vehicle Maintenance 119
HEX0131