Parking Lights; Front Turn Signal Lights - Chevrolet Sail U-VA Owner's Manual

118 Vehicle Maintenance

Parking Lights

Bulb replacement
1. Open the hood.
2. Remove the wheel arch panel, and
then remove the front bumper.
3. Remove the headlight assembly.
4. Turn the front parking light bulb
socket counterclockwise.
5. Pull the parking light bulb socket
out of the light housing.
6. Pull the bulb straight out of the
socket.
7. Install a new bulb into the socket.
See Bulb Specifications on page
122.
8. Turn the bulb socket clockwise to
refit inside the light housing.
9. Reinstall the headlight assembly.
As removal of other parts is required
(such as the front bumper and wheel
house panel), it is recommended to
have the bulb replaced at your
CHEVROLET retailer.
HEX0128

Front Turn Signal Lights

Bulb replacement
1. Open the hood.
2. Remove the wheel arch panel, and
then remove the front bumper.
3. Remove the headlight assembly.
4. Turn the front turn signal light bulb
socket counterclockwise.
5. Pull the front turn signal light bulb
socket out of the light housing.
6. Pull the bulb straight out of the
socket.
7. Install a new bulb into the socket.
See Bulb Specifications on page
122.
8. Turn the bulb socket clockwise to
refit inside the light housing.
9. Reinstall the headlight assembly.
As removal of other parts is required
(such as the front bumper and wheel
house panel), it is recommended to
have the bulb replaced at your
CHEVROLET retailer.
HEX0129