Dodge 2013 Durango User Manual page 103

WHAT TO DO IN EMERGENCIES
7. Pinch the three short and two long tubes to remove the protective plate from the steel
spare wheel.
Preparations For Jacking
1. Park the vehicle on a firm level surface, away from traffic for your safety.
2. Turn the engine off, place the transmission in PARK, fully depress the pedal to the floor
to set the parking brake, and activate the Hazard Warning flashers.
3. Block both the front and rear of the wheel diagonally opposite of the jacking position.
NOTE:
Passengers should not remain in the vehicle
when the vehicle is being jacked.
Jacking Instructions
1. Loosen the lug nuts on the road wheel one
turn while still on the ground, but do not
remove.
101