Dell PowerConnect 8024 User Configuration Manual page 607

5. Configure LAG 1 to be in general mode and specify that the LAG will
accept tagged or untagged frames, but that untagged frames will be
transmitted tagged with PVID 400.
From the Switching → VLAN → LAG Settings page, make sure Po1
a.
is selected.
Configure the following settings:
b.
• Port VLAN Mode — General
• PVID — 400
• Frame Type — AdmitAll
Click Apply.
c.
Figure 22-29. LAG Settings
6 Configure port 1 as a trunk port.
From the Switching → VLAN → Port Settings page, make sure port
a
Te1/0/1 is selected.
From the Port VLAN Mode field, select Trunk.
b
Click Apply.
c
Configuring VLANs
607