ORIGINAL OPERATING INSTRUCTIONS SD 5000‑A22 drywall screwdriver 1 These numbers refer to the corresponding illustra- It is essential that the operating instructions tions. The illustrations can be found on the fold-out cover are read before the power tool is operated for pages.
Observe the information printed in the operating instructions concerning operation, care and maintenance. To avoid the risk of injury, use only genuine Hilti accessories and insert tools. Do not use the battery as a power source for other unspecified appliances.
2.3 Chuck ¼" bit holder 2.4 Switches Control switch for smooth speed control Lockbutton for sustained operation Forward / reverse switch 2.5 Lubrication Grease lubrication 2.6 Grips Vibration-absorbing grip (in-line grip) 2.7 The items supplied include (toolbox versions): Power tool Depth gauge Bit holder B 22/2.6 Li‑Ion battery...
C 4/36‑90 Charger for Li-ion batteries C 4/36‑350 Battery B 22/3.3 Li‑Ion Battery B 22/2.6 Li‑Ion Battery B 22/1.6 Li‑Ion Hilti toolbox Designation Description S‑B PH2 4 Technical data Right of technical changes reserved. Power tool SD 5000‑A22 Rated voltage 21.6 V...
Battery B 22/3.3 Li‑Ion B 22/2.6 Li‑Ion B 22/1.6 Li‑Ion Energy content 71.28 Wh 56.16 Wh 34.56 Wh Weight 0.78 kg 0.78 kg 0.48 kg Temperature monitoring Type of cell Li‑Ion Li‑Ion Li‑Ion No. of cells 5 Spare parts Spare parts Designation Short designation Item number...
Page 11
e) Do not overreach. Keep proper footing and bal- d) Under abusive conditions, liquid may be ejected ance at all times. This enables better control of the from the battery; avoid contact. If contact acci- dentally occurs, flush with water. If liquid contacts power tool in unexpected situations.
Use of other batteries or use of the battery for of the type recommended by Hilti for wood dust purposes for which it is not intended presents a risk and/or mineral dust together with this tool. Ensure of fire and explosion.
If you disconnect a battery pack from the power tool (forward/reverse switch in the middle position). Use for transport or storage, make sure that the contacts of only the Hilti batteries approved for use with this the battery pack are not short-circuited. Remove loose power tool.
Page 14
8.4 Safe operation 7 8.9 Removing a previously-driven screw WARNING Remove the depth gauge or the magazine by pulling Do not grip the power tool by the depth gauge or bit it forward, away from the power tool. holder. A screw coming into contact with a concealed Set the forward / reverse switch to the reverse electric cable may result in electric shock.
Charge the battery with the Hilti charger approved for use 9.1 Care of insert tools with Li-ion batteries. Clean off dirt and dust deposits adhering to the insert...
Dispose of the batteries in accordance with national regulations or return them to Hilti. Most of the materials from which Hilti power tools or appliances are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, Hilti has already made arrangements for taking back your old power tools or appliances for recycling.
12 Manufacturer’s warranty - tools Hilti warrants that the tool supplied is free of defects in Additional claims are excluded, unless stringent na- material and workmanship. This warranty is valid so long tional rules prohibit such exclusion. In particular, Hilti...