Table of Contents
Advertisement
Periodically inspect all m oving parts for wea r and replace when
necessary with authorized service parts. Look for loose fasteners, worn
or broken parts, and leaky or loose fittings. Make sure all pins have
cotter pins and washers. Serious injury may occur from not maintaining
this machine in good working order.
The operator's manual and safety signs affixed on
the unit contain important instructions on the safe
and proper use of the equipment. Maintain these
important safety features on the implement in good
condition to ensure the information is available to
the operator at all times.
•
Ensure the manual canister is secured to the
equipment with the operator's manual inside.
•
Ensure all safety signs are in place and legible.
Replace missing, damaged, and illegible
decals. OPS-U- 0011
NOTE: The mower Operator's Manual and affixed Decals contain important instructions on the safe and proper
use of the mower. Maintain these important safety features on the mower in good condition to ensure the
information is available to the operator at all times.
FRAME ASSEMBLY
•
Inspect condition of mounting frame weldment.
•
Inspect condition of Turret Frame Assembly.
•
Ensure all bolts and screws are in position and
are properly torqued.
•
Ensure all pins are in place and fastened with
screws.
•
Ensure frame is properly mounted to tractor
and hardware is propely installed and
tightened. OPS-B- 0021_A
A-BOOM 03/09
©2009 Alamo Group Inc.
OPERATION
(SG-21)
Operation Section 3-13
Advertisement
Table of Contents
