HP x360 310 G1 PC Maintenance And Service Manual page 62

CAUTION:
assembly can result in damage to the display assembly and other computer components.
6. Lift the computer to force the hinges to rotate upward to an angle (4).
7. Separate the display assembly from the computer (5).
If it is necessary to replace any of the display assembly subcomponents:
1. To remove the display enclosure:
NOTE:
758846-001 for use in red models
758845-001 for use in silver models
a. Remove the two screw covers (1).
b. Remove the two Phillips PM2.5×4.0 screws (2) that secure the enclosure to the display.
54 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Support the display assembly when removing the screws. Failure to support the display
The display enclosure is available using the following spare part numbers: