Canon CLC1000 Service Manual page 333

3. REMOTE (machine settings with IPU in use)
r
OPTION
I t e m
REMOTE
n Details of Settings
REMOTE = 0,l
6
7
Note 1:
You must enter the appropriate value whenever you have replaced the reader controller PCB or ini-
tialized a RAM; record any new values on the service label for this purpose.
Description
Make the settings shown in A and 6 (table
below):
A: Use it to specify whether the Call key should
have a remote function. If it is not used as a
remote key, a command from the IPU starts
remote state and then local state after exe-
cution.
B: Use it to specify whether copying modes set
in local state should be maintained when
moving from local state to remote state.
C: Determines whether to retain copying modes
set in local mode when switching from local
to remote mode.
A
Keep as Call key.
Keep as Call key.
Use as Remote key.
Use as Remote key.
Use as Remote key.
Use as Remote key.
1997 CANON INC.
B
Retain
Do not retain
Retain
Retain
Do not retain
Do not retain
CANON CLClOOO REV.1 MAY 1497
Remarks
Settings: O-7
Standard: 0
PRINTED IN JAPAN (IMPRIME AU