Advertisement
How to Properly
Use the Urban
Advantage Stroller
1. TO OPEN STROLLER
Step 1: Release Locking Latch. (figure A)
Step 2: Unfold by pulling up to the handle. Make sure both sides
lock into place. (figure B) When locked in place, a small amount of
movement between the two locking pieces is normal, but there should
not be any open area between the two pieces, as shown in figure B.
2. TO SECURE CHILD IN STROLLER
Step 1: Lock brake-activated kickstand to keep stroller from rolling by
stepping on the brake bar until it locks into place. (figure C)
Step 2: Place child in stroller.
Step 3: Hook shoulder straps to waist belt.
Step 4: To secure, snap each side of waist belt into buckle. (figure D)
Step 5: For proper fit, adjust shoulder straps and waistband as shown.
(figure E)
!
wARnInG: AvOId SeRIOUS InjURy fROM fAllInG OR SlIdInG
OUt, AlwAyS USe ReStRAInt SySteM.
3. TO RECLINE SEAT AND/OR ADJUST FOOT RETAINER
!
wARnInG: when StROlleR IS USed In the ReClIned
pOSItIOn, All StRApS ShOUld Be Re-AdjUSted tO fIt ChIld
SnUGly.
!
wARnInG: ChIld MAy SlIp IntO leG OpenInG And StRAnGle.
neveR USe In ReClIned pOSItIOn UnleSS fOOt RetAIneR IS In
UpRIGht pOSItIOn.
8
HOW TO PROPERLY USE THE URBAN ADVANTAGE
Figure A
Figure B
Figure C
Figure D
Figure E
Advertisement
