Page 2
Thank you for your recent order. We wish you many happy travels with your new Infant Cruizer for Toddlers! Our goal at Go-Go Babyz is to offer innovative, high quality and safe products to make life easier when you and your baby are “on the go.”...
Before Assembling the Toddler Adapter .......... 6 General Instructions for Assembling ..........7 Assembling the Toddler Adapter ............. 8 Attaching & Removing Your Convertible Car Seat ....... 10 Registration & Maintenance ............11 Using Your Infant Cruizer.............. 12 Express Limited Warranty ............13 TABLE OF CONTENTS...
Safety DO NOT USE the Infant Cruizer until you read and understand these instructions. Your child’s safety depends on you reading and following these instructions. WARNING : NeveR leAve ChIlD uNATTeNDeD. WARNING : AvOID SeRIOuS INjuRy fROM fAllING OR SlIDING OuT. ALWAYS USE THE HARNESS SYSTEM PROVIDED WITH YOUR INFANT OR TODDLER SEAT AS INSTRUCTED BY THE MANUFACTURER.
Quick Assembly Guide: # 1 Remove infant seat Adapters from the bottom of the Infant Cruizer base. # 2 Snap Toddler Adapter in place. # 3 Screw down Toddler Adapter onto Infant Cruizer base with the four screws included in the box.
RECEIVED THE PRODUCT IN THE MAIL AND THE BOx APPEARS DAMAGED, PLEASE INSPECT IT AND REPORT ANY DAMAGE TO GO- GO BABYz BEFORE THROWING AWAY YOUR BOx. GO-GO BABYz WILL FILE A CLAIM DIRECTLY WITH UPS OR OTHER FREIGHT CARRIERS AND WILL REPLACE THE PRODUCT AT NO ExTRA COST.
1 Short Adjustable Ladder Strap (B) 1 Buckle Strap (C) 4 Screws-one shown (D) (to attach the Toddler Adapter to the base of the Infant Cruizer) 2 Screws-shown with ladder & buckle straps (B&C) (to attach rear adjustable ladder strap and rear buckle strap)
Once the screws are removed, you can take the Infant Seat Adapt- Britax Peg Perego ers off the base of the Infant Cruizer and store Adap ters Adapters for future use.
Page 9
Below shows: the toddler adapter, rear buckle Below shows one of the front straps attached & ladder straps attached to Infant Cruizer. to the Toddler Adapter. Below shows the front strap going through the car seat to stabilize the seat on the Infant Cruizer.
Attaching & Removing Your Convertible Car Seat SET YOUR CAR SEAT ONTO THE INFANT CRUIZER Extend the Infant Cruizer handle into the up- right, locked position. Set your Convertible Car Seat onto the Infant Cruizer facing forward. Thread the rear adjustable ladder strap (lo- cated near the handle of the Infant Cruizer) though the back of the Convertible Car Seat.
Registration & Maintenance PleASe ReGISTeR By registering your product, Go-Go Babyz will automatically notify you if there is any unforeseen product recall and we will keep your name and date of purchase on file for referencing your warranty information. CARe & MAINTeNANCe: Periodically check for worn parts or loose screws.
DIRECTION. TO lOCK fRONT TOe BRAKeS: Pull Infant Cruizer backwards a little bit to expose caster brake pedals in the front of the Infant Cruizer and step on brake pedals until they remain in the locked position as Front Toe shown in Picture C.
Go-Go Babyz will repair or replace, at its sole option, the defective product within that one-year time period. If you have a problem with your Go-Go Babyz product or are not satisfied with it, please contact Go-Go Babyz Customer Service at 1.888.686.2552.